I may have incorrectly seasoned my wok; can I fix it?
I seasoned my new carbon steel wok, and think I may have made a mistake. I scrubbed off the coating it came with using a scouring pad, and then heated it on a high BTU stovetop until it turned a nice blue hue, as the directions told me. Finally, I let it cool a bit and then added some oil around the inside and outside, putting it over the heat. I washed it with warm water only after the first addition of oil (once cool), then added oil again over heat, and repeated a third time (this time with onions, ginger, and garlic). It was still blue (I had heard it was supposed to turn black), but I figured (I suppose incorrectly) it was okay and ready to use.
My first attempt left food sticking to it and I figured I had messed up. Once clean, I tried scrubbing the center to get any coating off, and then re-exposing it to heat and then to oil again (canola), applied with a wet paper towel. I did this about 7 times, but I tried cooking again and an egg I added to a sitr-fry stuck during the first attempt.
It looks like I probably messed up the oiling part of the seasoning process. Can I simply scrub the wok down using steel wool or something and start the process from scratch, or is my wok a lost cause at this point? I have read different things about how to add the oil, what temp to keep it at, and for how long. Could you clarify the best approach?
Best Answer
One thing that might help is more heat after applying the oil. I use a metal wok spatula in mine, which scrapes the coating on the bottom, so after cleaning (water and if necessary a plastic scraper) I dry it on the heat, add a little oil and get it good and hot. While the oil is warm I swirl it round then wipe off the excess, then I get it hotter. If I don't do this, and don't use it for a week or two, it rusts where the seasoning gets scraped.
This is a cheap carbon steel wok I've had for about 20 years, and I didn't put much effort into seasoning it in the first place. I'm generous, but not authentically so, with my oil, and if anything sticks it's high up the sides above the level of the rest of the food.
Pictures about "I may have incorrectly seasoned my wok; can I fix it?"
Quick Answer about "I may have incorrectly seasoned my wok; can I fix it?"
One thing that might help is more heat after applying the oil. I use a metal wok spatula in mine, which scrapes the coating on the bottom, so after cleaning (water and if necessary a plastic scraper) I dry it on the heat, add a little oil and get it good and hot.How do you fix a scorched wok?
Follow the steps below to remove all residue:How do you get seasoning off a wok?
Abrasive chemicals or sponges can damage the patina of your wok, and that's exactly what you don't want to do. Finally, she also recommends putting it back on the heat one last time to dry it, just before you put it away. (And don't worry \u2014 if the patina on your wok disappears, it's not the end of it.Can a wok be ruined?
If your wok ends up with rust or burned-on food, soak it in warm water for about 5 minutes to loosen up the particles. Then clean it as you usually would (read: with a gentle sponge or cleaning pad). You can also use steel wool for particularly difficult-to-remove rust or food, if necessary.Sources: Stack Exchange - This article follows the attribution requirements of Stack Exchange and is licensed under CC BY-SA 3.0.
Images: ShotPot, Ann H, Tima Miroshnichenko, Leah Kelley