Ceramic Cooktop (non induction) getting damaged after use
We just moved into a brand new unit(just constructed) and it has a Ceramic cook top. We have only been there 2-3 weeks, and cooked maybe < 10 times.
After a few of our cooking sessions, I am seeing some white coloration around the edge of the cooking circle. It appears to be below the surface, I cant feel anything different around that area. It was below my cookware and I dont think anything splashed on it.
It might be due to the following cases
- We used oversized cookware which was actually sitting on the raised edge of the stove and perhaps not actually touching the glass surface.
- On a different occasion we used a different situation we used a vessal with a smaller base than the smaller circle, and thus possibly the edges of the circle got overheated or something..
We are very new to ceramic cook tops, mostly experienced with gas, minimal experience with induction. I notice some places suggesting that the cookware base is recommended to be >= size of the circle, is this the cause of our problem?
Is there a way to rectify or is this permanent??
Update: These stains are disappearing/Moving with regular use, I would guess just a new stove phenomenon.
Best Answer
It looks suspiciously like water that's been burned off at the edge of an overboiled pot.
On ceramic tops you get two kinds of stain. You get grease/food burned on, and that'll turn black like the inside of your toaster over, and you get the white mineral stains which comes from water drying around the edges.
The center usually stays clean because it gets super hot and will burn most anything away, but the edges don't get as hot as easily.
The way I clean them and it's considered rather unorthodox is to turn the burner on while the stovetop is bare. Let the edges get hotter than they would if a pan were keeping them cool, and much of this will burn away. After you see no further progress, turn off the stove and let it cool a little, but still above booling point of water, then use the green face of a scotch brite sponge to scrub any residue left over.
You can also try lye, but I am not a big fan of lye cleaners.
Pictures about "Ceramic Cooktop (non induction) getting damaged after use"
Can you damage a ceramic hob?
Many people love ceramic hobs and stove tops because of the way that they evenly cook food in an efficient manner versus other types of hobs. However, sadly, they can be subject to wear and tear that can cause permanent damage that is very visible \u2013 specifically when cracks form.Can you ruin a glass top stove?
Glass-ceramic electric stovetops are popular because they are easier to wipe down than a gas or electric coil stove. But, if you have one of these stoves, be careful with what you use to wipe it and how you do it. A bad decision can lead to permanent appliance damage.What causes a ceramic cooktop to crack?
The two most common reasons glass cooktops crack are impacts from heavy pots and excessive heat from one of the burners or a hot spot created by burnt-on food.Do ceramic cooktops scratch easily?
You can easily wipe the remnants of any dish off your ceramic unit, just be sure to use the proper cleaning solution and wipe away carefully, as ceramic cooktops can be scratched easily. Ultimately, the biggest pro of a ceramic cooktop is the modern aesthetic it brings to your kitchen.How to Remove Scratches from a Ceramic Cooker Hob - TESTED
More answers regarding ceramic Cooktop (non induction) getting damaged after use
Answer 2
My ceramic stovetop came with a small bottle of cleaner called "Cerama Bryte." cooktop cleaner. You can go to CeramaBryte.com for more information. I have used this on my stovtop ever sense. It will remove the white spots and also any grease or oil splatters that might have burnt on, It is like magic and my stovtop looks like it did when it was brand new. Barbara B.
Answer 3
Schott Ceran (one of the manufacturers of the glass) webpage they say not to use aluminum or copper cookware because it can cause permanent traces known as "burn in" on the cooktop, that can not be removed. I wish I had known this many years ago before I also ended up with those marks just like the one in your picture. There was nothing at all I could do to remove them from my brand new stovetop. I will try to paste a link here. http://www.schott-ceran.com/us/english/syn/variety/index.html
Answer 4
The ceramic of a hob is very hard. When we fitted one of came with a scraper - a mounted razor blade. This is excellent for getting any surface muck off. You can buy "glass scrapers" which are the same and not expensive. There shouldn't be any chance below the surface.
Sources: Stack Exchange - This article follows the attribution requirements of Stack Exchange and is licensed under CC BY-SA 3.0.
Images: Karolina Grabowska, cottonbro, Karolina Grabowska, Karolina Grabowska