Soda carbonation
With the process below, why wouldn't the yeast eat all the sugar or explode the bottle whichever comes first? How does the yeast eat the sugar to make carbonation, yet keep the soda sweet?
Directions from Homebrew4less.com:
Sprinkle 1/8 teaspoon dry yeast (Red Star preferred) in 6-oz. of warm water. Let sit undisturbed for 15 minutes then stir gently to thoroughly dissolve. While waiting for the yeast to dissolve, shake extract bottle well, mix 2-1/4 cups of sugar and 1 tablespoon of soda extract in 1 gallon of lukewarm water. Mix until sugar is completely dissolved, then add yeast mixture stirring well. Pour 1/2 of this mixture in each 2 liter soda bottle and top off each one with plain water to within 1 1/2 to 2 inches of top. Attach a resealable cap and shake well. Store bottles at room temperature, preferably between 70 and 75 degree F for 4 to 6 days. You can tell by the firmness of the bottle how your carbonation is coming along. Move to cooler area if possible for another week of aging. When fully carbonated and aged the bottle should be just about as hard as a glass bottle. At this point chill thoroughly for 24 - 48 hours before opening and enjoying.
Best Answer
If you follow the process, the yeast are not cold-tolerant strains and shut down for most intents and purposes when the bottles are chilled. Plastic soda bottles also take a LOT of pressure to burst, and unlike glass you CAN gauge the pressure by feeling them (and they don't make shards if they do explode, but they sure do make a mess.)
This is pretty much the standard "extract soda carbonated with yeast" recipe.
With glass bottles (or if you don't chill them) explosions are not uncommon, and were much harder to clean up (not to mention the hazard if you happened to be in the area at the time.)
In summary, use plastic bottles only, and storing them in a big plastic tub or a room you can easily hose down into a floor drain is not a bad precaution, just in case. But there's no real hazard beyond the mess if you use plastic, so dive in and have fun. The alcohol production is trivial; the dead yeast is only in the dregs if you pour carefully.
Pictures about "Soda carbonation"
What is carbonation in soda?
carbonation, addition of carbon dioxide gas to a beverage, imparting sparkle and a tangy taste and preventing spoilage. The liquid is chilled and cascaded down in an enclosure containing carbon dioxide (either as dry ice or a liquid) under pressure.What level is carbonation in soda?
A typical carbonated soft drink contains approximately 3\u20134 volumes (6\u20138 g/L) CO2. Carbonation is usually determined in soft drinks by measuring the pressure in the container at a known temperature. The pressure inside a container (can or bottle) is dependent upon the level of dissolved CO2 and the temperature.How does carbonation affect the body?
Side Effect of Carbonated Drinks: Belching and Heartburn Consuming carbonated soft drinks may cause repeated belching as your stomach stretches from the accumulation of carbon dioxide gas. Food and stomach acid may come up your food pipe as you belch, causing heartburn and a sour taste in your mouth.Is drinking carbonation good for you?
Is carbonated water good for you? Carbonated water that solely contains water and carbon dioxide is considered to be a healthy beverage. It hydrates just as well as regular water does. However, some carbonated waters contain additives and other ingredients that decreases their health benefits.Modern Marvels: How Does Carbonation Work? | History
Sources: Stack Exchange - This article follows the attribution requirements of Stack Exchange and is licensed under CC BY-SA 3.0.
Images: Lucas Andrade, Lucas Andrade, Artem Beliaikin, Craig Adderley