How to avoid burned layer on seared hamburger?
I usually make my hamburgers at home by putting a little oil in a pan and then just placing the patty in it on medium heat for 10-15 minutes.
Inevitably, while the meat ends up about medium rare, there's a semi-burned layer along the bottom, where it's browned and crusty. I always have to pick this off and I'm finally sick of it.
What am I doing wrong?
Best Answer
Make sure you flip it reasonably frequently; that'll actually make it come up to temperature faster inside, so the outside won't have as long to burn.
Also make sure you haven't made your patties excessively thick. 10-15 minutes on medium sounds like a fairly long time for normal sized burgers, so possibly yours are on the thick side. If you do really want thick patties, you're probably better off using a more gentle cooking method like the oven for some of the time. You can bake until nearly done, then sear to finish, or start with a sear then bake til done.
Beyond that, if it's burning on the outside before it's done on the inside, the normal fix is to simply reduce the heat, so you cook more slowly, giving the heat time to reach the center without burning the outside. But at 10-15 minutes already, maybe you don't want to go much slower!
Pictures about "How to avoid burned layer on seared hamburger?"
Quick Answer about "How to avoid burned layer on seared hamburger?"
You can bake until nearly done, then sear to finish, or start with a sear then bake til done. Beyond that, if it's burning on the outside before it's done on the inside, the normal fix is to simply reduce the heat, so you cook more slowly, giving the heat time to reach the center without burning the outside.How do you not burn a burger on a skillet?
Before the oil cooks all the way out but is 80 percent gone flip the patty and add no more than 1/8 a cup of water. This will keep the juice in the burger, keep the bottom from burning and is a great test. Once the water cooks out, flip repeat, and its done.How do you grill burgers without burning outside?
Lower the temperature to medium and flip the burgers back to the first side; a lower temperature cooks the inside without burning the outside. Cook the burgers for about 5 more minutes, then flip them to the second side to cook for an additional 3 to 5 minutes.How do you stop ground beef from overmixing?
How do you keep ground beef from turning brown?
According to Miss Vickie, freezing is the most effective way to preserve the quality and prolong the shelf life of your ground beef. Browning will still occur regardless, but it's nothing to worry about as long as you seal it properly and make sure that your freezer is operating at a sufficiently cold temperature.The Biggest Mistakes Everyone Makes When Cooking Burgers
More answers regarding how to avoid burned layer on seared hamburger?
Answer 2
I like using a cast iron skillet under the broiler...like this: https://cooking.stackexchange.com/a/15457/6279
It will caramelize the outer layer of the meat without burning it...
Answer 3
Hamburgers can be cooked by the same method as steaks; if you have an oven safe pan, basically bake and sear or sear and bake; the former is a bit easier since flipping a mostly-uncooked hamburger can be very difficult.
Basic instructions: Place hamburgers on cast-iron or other oven-safe pan. Bake for 5-10 minutes (length depends on thickness) at 350-400°F. Remove from oven, place on stove over high heat; flip after 20 or so seconds (depending on how much of a sear you like) and then after the second 20 or so seconds remove to plate.
This is basically the reverse of the method in the first section here. SeriousEats also recommends this method at the bottom of this article, although they recommend in a very low temperature oven - I've not tried that before (but may want to this weekend!).
Incidentally, if you are looking to simply improve your burger experience overall, Serious Eats' Ten Tips to Better Burgers is a good place to start, or just start reading Burger Lab articles. They're outstanding, and usually very doable without being very strong in technique.
Answer 4
You could use a low temperature water bath (sous vide). Cook your burgers 56 - 60 c (depending on desired doneness), 1.5 to as much as 6 hours. Remove from bag. Put whatever sear you want on it, because the burger will be cooked.
Answer 5
I use 80/20 beef for my burgers and don't have to use any oil in the cast iron pan. Cooking it on a medium heat. Kinda go by sight so couldn't tell you how long until you flip them but I don't have the issue of it being burned on the outside. I like my burgers medium as well. I do think that the fat percentage does make a difference and the type of pan you use. I know this probably isn't very helpful.
Sources: Stack Exchange - This article follows the attribution requirements of Stack Exchange and is licensed under CC BY-SA 3.0.
Images: Tim Douglas, cottonbro, Henry & Co., Klaus Nielsen