Gas burner is "clicking" - how can I stop this?

Gas burner is "clicking" - how can I stop this? - Gas Stove

The ignition is clicking on my burner even though I turned it off. How do I stop this?

I unplugged the cooktop, but I don't know if it is safe to leave it this way. What should I look for? Can I keep it unplugged safely for any length of time?



Best Answer

I bought a used cooktop off ebay once that did the same thing. I discovered it to be one of the dials which was catching in the ignite position (although the dial didn't look depressed). Give the dials a good workout when the ignitor is clicking away--you might release the switch.

That fixed it for me and I soon identified the culprit dial. Every so often the constant ignition would come back but I'd just smack the guilty dial and it would stop.




Pictures about "Gas burner is "clicking" - how can I stop this?"

Gas burner is "clicking" - how can I stop this? - On Gas Burner
Gas burner is "clicking" - how can I stop this? - Concentrated husband in apron frying food on pan while cooking on gas stove with wife in kitchen
Gas burner is "clicking" - how can I stop this? - High angle of positive multiracial couple frying eggs on skillet using metal gas stove on wooden table near car and tent in forest



How do you stop a gas burner flame?

NOTE: If the flames are too high or low and you must adjust them, you may do so manually.
  • Light all surface burners.
  • Turn the knob on the burner being adjusted to Lo.
  • Remove the knob.
  • Insert a small, flat-blade screwdriver into the valve shaft.
  • Turn the valve to adjust the flame.
  • Replace the knob.


  • Why is my gas burner flame so high?

    The Flame is Higher on One Side If one side of your burner is wildly too high and the other side looks very weak, it is an indicator of an improperly positioned burner cap. When you bump the burner or have taken off the cap to clean your stove, it can lead to a misaligned burner cap.

    How do I stop my gas igniter from clicking?

    All you have to do is clean out the gunk.
  • Unplug the power source.
  • Remove the burner cap.
  • Use a toothbrush or other small scrubber to remove/dislodge food. Around burner. Under knobs. Around igniter.
  • Use a Q-Tip dipped in alcohol to get rid of the last little bits of buildup.
  • Replace burner cap & get to cookin'!


  • How do I stop my gas cooker from sparking?

    How to Fix It:
  • Disconnect your stove from its power source.
  • Remove the burner cap.
  • Clean around the igniter with a dry toothbrush or other small brush.
  • Use a paperclip or sewing needle to unclog the fuel ports.
  • Use a Q-tip dipped in rubbing alcohol to remove stubborn grime.
  • Replace the burner cap and reconnect stove.




  • My gas cooker won't stop clicking - How to fix it




    More answers regarding gas burner is "clicking" - how can I stop this?

    Answer 2

    One of my old gas stoves would click as you describe when the ignitor got wet or clogged up with foodstuff. Taking the top off each burner unit, if possible, and cleaning around in there might help.

    Answer 3

    The only purpose of plugging in a gas stove is for the electric ignition to work. This is malfunctioning for you, but it is not a safety problem. The gas output is controlled by turning the knobs on and off. You can successfully and safely use your gas burners by lighting them with a match.

    Sources: Stack Exchange - This article follows the attribution requirements of Stack Exchange and is licensed under CC BY-SA 3.0.

    Images: Magda Ehlers, suludan diliyaer, Gary Barnes, Uriel Mont