Seasoning new cast iron cookware [duplicate]
I am a neophyte cook (and a guy). I bought some cast iron cookware in the hope of taking it camping. It seems that it must be seasoned before use. I looked on-line and followed the directions. Not knowing if the seasoning was just for the cooking surface or the entire item, (I figured it's all iron, right) I coated the entire griddle and Dutch oven in vegetable oil and baked at 350° for an hour. Now both items are sticky. What did I do wrong and how do I fix it?
Best Answer
It's possible that you put a too-thick layer of oil on (e.g., if you dumped oil on it instead of wiping it on with a paper towel or similar). Or that you used a oil that doesn't work well; soy works and it's cheap.
But more likely, it just hasn't cured fully—and the fix is simple, bake it longer and/or hotter. The exact time/temperature needed depends on the oil you use. And how much smoking you're willing to tolerate. [Hotter is quicker, but smokes more, up until you get too hot and just burn the seasoning off like an oven cleaning cycle.]
Note typically you put on more than one layer of seasoning.
PS: If it came coated in wax, etc. to prevent rust during shipping, I hope you removed that first. Bare iron is metallic gray.
Pictures about "Seasoning new cast iron cookware [duplicate]"
Can you season a cast iron pan twice?
#3Seasoning Can Be an All-Day Job The process of seasoning cast iron cookware consists of coating it with oil, heating it in the oven, letting it cool, and repeating. It's up to you how many times you repeat, but the more you do it, the better your patina will turn out.Are new cast iron pans already seasoned?
Every piece of Lodge cast iron cookware comes seasoned and ready to use right out of the box. The easiest way to maintain this layer of seasoning is to use your cast iron pan.Can you use a new cast iron pan right away?
Some new cast iron pans come \u201cpre-seasoned\u201d, meaning they have a layer of grease already so you can start cooking with them right away. With pre-seasoned pans, I immediately cook with foods like bacon or use it for deep frying, both of which will release more fat to help develop a non-stick surface.How do I season a brand new pre-seasoned cast iron skillet?
To use a pre-seasoned cast iron skillet for the first time, rinse it in hot water and pat it completely dry. Pour a generous amount of high-smoke point cooking oil inside it, then preheat (not on high) and cook with it. Of course, there's more to it than meets the eye.HOW TO season cast iron on the BBQ ...(your spouse will thank-you!)
More answers regarding seasoning new cast iron cookware [duplicate]
Answer 2
A good starting cure usually takes multiple bakes. That sticky coating in the beginning is normal. The additional cures/uses will smooth that out. I recommended light coats, repeated several times. And, over the years, the best way I've found to truly cure cast iron is to cook with it (like fried spuds, slightly fried corn tortillas, etc -- things that have good success of not sticking and ruining the starting cure) as many times consequtively as possible. Obviously, these methods can't really be done in a hurry. But cast iron curing is a Marathon, not a sprint. My best pan is going on 20 years. And finally, try not to overheat the newly cured cast iron, as this will burn away what little cure you have.
Sources: Stack Exchange - This article follows the attribution requirements of Stack Exchange and is licensed under CC BY-SA 3.0.
Images: Magda Ehlers, Pixabay, Charlotte May, Max Vakhtbovych