How to stop grease dripping on coals from catching flames?

How to stop grease dripping on coals from catching flames? - Low angle of trendy black female adolescent leaning forward while demonstrating control gesture and looking at camera against lamps at night

I am using one of those small grills where the grate is only about an inch or two above the coals. When I cook something that doesn't have much grease (like vegetables), it is fine but the main thing I got the grill for is grilling mackerel. It's a fatty fish and drips grease on the coals, which then catches flames and carbonizes the outside of the fish while the inside remains uncooked.

enter image description here

There is a reason we have this little (slightly bigger than a shoe box) grill and that's because we like to take it camping (where we also like to grill mackerel). I understand the problem might be solved by a bigger grill where the flames don't reach the food. Is there any technique to mitigate this situation with this little grill?

I do wait until the coals have no more flames and are almost out. Just a few seconds after I put fish on the grill, flames start from underneath it. I move the fish to a different part of the grill where there is no flames but flames start there after just a few seconds.



Best Answer

Well these are not really techniques to prevent dripping fat from catching fire, as far as I know that is not easy to achieve, these are rather workarounds to minimize the damage.

  1. Use some sort of water sprinkler system like a squirt bottle, sprinkler bottle or vaporizing or a squeeze bottle over the flames. If used moderately directly aimed at the flame area, it will reduce the flames without killing the fire.
  2. Keep a box of ashes from previous fires around, when flames erupt sprinkle a little over the flame area. If used properly will have the same effect as the water above. It may be slightly less practical due to being harder to avoid inadvertently pouring ashes over the food, but its less likely to cool the fire.
  3. Catch the fat before it hits the embers. If what you are grilling can effectively be cooked with indirect heat, then place a tray, box or any wide catching container to collect the fat before it hits the fire. Possibly filled with water to be easier to clean afterwards. It is what most electric and indoors grills use.



Pictures about "How to stop grease dripping on coals from catching flames?"

How to stop grease dripping on coals from catching flames? - Fired Charcoal
How to stop grease dripping on coals from catching flames? - Charcoal Is on Burning
How to stop grease dripping on coals from catching flames? - Selective Focus Photography of Burnt Charcoal



Quick Answer about "How to stop grease dripping on coals from catching flames?"

  • Wipe your catch-pan: Empty and wipe the grease catch-pan or cup each time before you start grilling.
  • Preheat your grill: To burn off the cooking grates.
  • Brush your grates: Use a quality grill brush to scrape off any remaining burnt food or carbon.


  • How do you stop a fat catching fire on a BBQ?

    how to prevent flare-ups
  • Trim the fat. Flare-ups usually happen because of excess fat, sauces or oily marinades. ...
  • Keep the lid open. When searing fatty foods, leave the grill lid opened.
  • Avoid wind. Try to keep your grill away from windy areas. ...
  • Move your food. ...
  • Burn the grease away. ...
  • Clean your grill.


  • How do you stop coals from flaming?

    One way to prevent flare-ups is by minimizing the amount of fat and oil on the food you grill. Chicken, steaks, and burgers will all drip fat onto coals during cooking. This isn't necessarily a bad thing\u2014it's their higher fat content that makes these foods good for grilling in the first place.

    Why do I keep getting grease fires in my grill?

    Consistent cleaning of the cooking surface and the inside of the grill greatly decreases the risk of a fire. Without proper cleaning, heated grease can accumulate, liquify and vaporize, which can ignite a fire. If this happens, turn off gas and leave the lid open to let grease burn off.

    Why does my charcoal grill catch fire?

    These bursts of intense flames are caused by oil or fat dripping off of food and hitting the coals, essentially causing a grease fire. They tend to occur soon after food is placed on the grill or once it's been flipped.



    5 Mistakes Beginners Make When Using Charcoal




    More answers regarding how to stop grease dripping on coals from catching flames?

    Answer 2

    If you have some sort of lid that you can put over the whole thing (but still allow some air in), then you can use indirect cooking -- pile the coals up on one side of the pan, the fish on the other.

    You can then slowly heat it up to render most of the fat, and then move it over to the hot side if it's not cooked through.

    If you put a smaller pan of water under the fish, it'll reduce the chance of the dripping fat to catch on fire, but the steam that's created means that it won't brown quite as well.

    Answer 3

    Unless you go with indirect cooking you cannot stop the grease from dripping on the coals. For that you pretty much need to have a cover.

    If you have a (vented) cover it should starve out enough oxygen to stop the grease fire. It is also nice for temperature control.

    Very shallow grills can be a problem even with cover.

    I get you like the small size but that is working against you on flame control.

    Even the squirt gun approach is harder on a shallow grill has you have to cool the coals more so you have more risk of putting them out.

    Sources: Stack Exchange - This article follows the attribution requirements of Stack Exchange and is licensed under CC BY-SA 3.0.

    Images: SHVETS production, Engin Akyurt, Lukas, Lukas