How much salt should I add to a dish?

How much salt should I add to a dish? - Concentrated middle aged ethnic male in casual clothes and apron adding salt while preparing delicious dish in kitchen at home

I find it hard to figure out how much salt to add to dishes. I'm always afraid I'll make it too salty. Recipes always call for salt to taste, but what does that mean? Is there a good rule of thumb?



Best Answer

I've noticed that salty food has somewhat of an addictive quality; people who eat a lot of it (i.e. fast food or other processed food) tend to bury their meals under a mountain of salt, whereas people such as myself who do a lot of home cooking hardly use (or want) any.

"Season to taste" means pretty much what it sounds like; add however much salt (and other spices) that you, personally, like the taste of. If you have a habit of eating a lot of salty foods, then you might want to add a little less than that, for the benefit of people like me who gag at heavily-salted foods.

If you use a lot of other spices, you won't need much salt - a few shakes of the shaker is enough. If the food is basically bland aside from the salt (and maybe pepper), then you'll need to use more. The best thing to do is add a little, then taste, and repeat as many times as it takes to get the flavour you want. If the food you're seasoning is still raw (and can't be eaten raw), then just put in a small amount the first time you make it and keep track of how much table salt you needed to add.

Just remember, you can always add salt later, but a dish that's too salty is permanently ruined.




Pictures about "How much salt should I add to a dish?"

How much salt should I add to a dish? - High angle of crop unrecognizable male chef adding kosher salt in pan while cooking traditional lunch in restaurant kitchen
How much salt should I add to a dish? - Table on Wooden Plank
How much salt should I add to a dish? - Food on Table



How do you know how much salt to use?

Generally 1 per of the total dish. Like if are cooking 100L of soup you would need 1kg of salt i.e. one whole packet. So if you are cooking 1L of broth 2 teaspoon should be good, bcoz one teaspoon is 5ml.

How much salt do I add to seasoning?

Typically you'll need 1 \u2013 2 teaspoons of salt per pound of raw meat, seasoned before cooking. Each pound of vegetables will crave approximately 1 teaspoon of salt. If using significantly less than a pound just be sure to add a small pinch!

How much salt do you need to taste?

To save yourself time and stress, the next time you encounter \u201cto taste\u201d as the only salt measurement in a recipe, start with 1/4 teaspoon, or two average-size, two-fingered pinches, for every serving in the recipe. The goal isn't to make food taste noticeably salty, only to make it taste noticeably of itself.

How much salt do I add to sauce?

Every time you add an ingredient, add a pinch of salt. Add salt to vegetables while they sweat. Add salt when you pour the wine in. Add salt with the tomatoes. As a general guideline, add salt 1/4 teaspoon at a time, tasting after every addition and adding more when necessary.




More answers regarding how much salt should I add to a dish?

Answer 2

Salting food has a predictable trajectory. Think of it like a roller-coaster. /\ At first it's not great, then it's great, then it's not great again.

Food with no salt will taste one-dimensional and flat. The flavors will not "pop". Add a little salt and the taste of a dish will start to both integrate and become more complex.

With the perfect amount (differs by palette), the dish will just taste great, with all flavors easily identifiable and balanced (this partly depends on getting other elements of the dish right).

As you oversalt somewhat, the dish will begin to have a sharp but one-dimensional quality, an edge to it. Some people like this. It is what many people become addicted to.

As you go beyond this point, the dish begins to taste like, salt. It has a briny quality that will make your mouth uncomfortable.

As many have mentioned, it's a lot easier to make something more salty than less, so add salt gradually and regularly. Few beginning cooks know that adding small amounts of salt multiple times enhances the cooking process, allows flavors to meld, and lessens the likelihood of oversalting all at once.

Answer 3

It's a little more complicated to ask how much.

Different people have different palates, depending on what they're used to.

But more importantly, salt doesn't just make stuff taste good. We shouldn't just sprinkle it on the end of a dish. Otherwise, the dish just tastes... salty.

Salt affects the water balance in the cells, it can plump up moisture (brining a turkey - brings in other flavour), and it can remove moisture (salting sautéed mushrooms extracts more water, creating more browned/flavorful mushrooms).

We really should season as we go. Salt a little at various stages of your cooking. Err on the side of caution. And season at the end - to taste. The idea is that you shouldn't have to add too much salt to get it right.

You'll end up with a much tastier, more complex flavor profile. And you'll likely use less salt as well.

Unfortunately, there isn't much replacement for experience in this area. With experience, you know exactly how much salt to use, which type of salt, at which time. Practice and screw it up a lot. In the interim, just keep trying.

General rules, though:

  • Foods served cold need more salt. A properly seasoned hot dish will be under-seasoned when cold.
  • Starches absorb salt - Potato salad needs to be salty; the next day it will be less salty. Or potatoes in a stew will suck out the salt; you'll need to reseason.

For these reasons, chefs always season their mise en place, then when finishing the dish, always check the seasoning.

Answer 4

Salt to taste means exactly that. You add a bit, taste it and then repeat the process until you like the result. Of course that once you've done the process a lot on different dishes, you will have a feeling for how much to use and you'll have to repeat the process less or even skip it completely, but what's the fun of cooking without tasting.

For things you cannot taste and repeat (like when cooking meat on a grill) my taste is to add a pinch on each side of the meat, evenly distributed. No way to tell what's yours so...

Rule of thumb: It's best to err on the side of missing salt than the other way around, so be shy. At worst you'll have to use salt on the table to fix it, but it'll be edible.

Answer 5

I would say it depends. Some recipes need salt to work. If you use yeast, you need salt to control the gross. If the usage of salt is for taste, I first look if I can use a healthier substitute. This depends on the particular dish, however, since in my family we all like hot spicy food, we usually do not need any salt. Instead we enjoy the healthy benefits of turmeric, ginger and other spices that even make the food tastier than with salt.

Answer 6

Salt to taste. As others have written. Add a pinch of salt. Stir. Wait. Taste. Repeat.

I use very little salt for myself, so my rule of thumb is that when I start tasting it's salty, I'm done. My wife need far more salt than that.

Answer 7

Generally 1 per of the total dish. Like if are cooking 100L of soup you would need 1kg of salt i.e. one whole packet.

So if you are cooking 1L of broth 2 teaspoon should be good, bcoz one teaspoon is 5ml.

Generally people are able to escape this without measuring and just by intuition "hmm this about feels right" because salt has a wide range. 0.75% - 1.5% is what you can escape. So a person who would add 1.5 teaspoon mistakenly adding 2 teaspoons is still safe. A lot also depends on the content of the dish, like a more acidic solution and more sweeter solution can take more salt. Therefore sometimes when your dish is overly salty, you can correct it by adding either vinegar, lime, yoghurt, tamarind or sugar, jaggery, dates, syrup etc.

Salt have a very peculiar graph i.e. it amplifies your dish flavours, add a pinch more to a teaspoon and maybe it just amplifies twice as what was previously, but an extra grain and the whole dish is ruined. There's a peak after which it descends to zero just at the next level. The best cooks can consistently replicate that peak. How? By measuring, tasting, noting.

So if your particular broth can have complex flavours, acids, sweets. You can start with 0.75%, order your measuring spoons, increase bit by bit; you can do this for a larger dish by taking out a smaller batch and try to find that peak. Now you know how much per you can go for. Next time always add a level below peak. Like 1.25% is peak, without fearing that it will ruin dish next time you can safely add 6 teaspoons to a 3L broth i.e. 1%.

Yes, your saltiness will depend on culture, dish, preferences.

Sources: Stack Exchange - This article follows the attribution requirements of Stack Exchange and is licensed under CC BY-SA 3.0.

Images: Gary Barnes, Svetlana Ponomareva, Pixabay, Pixabay