Excess oil in fan grease trap after stir frying in a wok
I use a steel wok on induction. When I weekly check the fan grease trap, there's enough oil to run a 1957 DeSoto through the Nevada desert and still have plenty left over for John Travolta's hair.
When I travelled Asia, the chefs always seemed to douse the food in oil (and stock), and my own impression is that without sufficient oil, it feels as if "nothing's happening" in the pan.
In particular, vegetables like broccoli, seem to absorb oil like there's no tomorrow. I use rapeseed oil and run my wok on 85% of maximum heat, which seems to be the perfect temperature.
My question: How much oil is required for a standard one person wok meal, and how do I make sure the oil goes into the food, not into the fan?
(I'd also appreciate a physical/chemical explanation of why this happens. I assume it's because of the high temperature, that the oil is transported along with the "smoky" streaks from the cooking.)
Update: An important part of the problem is how the Swedish quality fan is constructed: The oil caught in the grease trap will slowly drip down outside the outer edges of the fan screen onto the induction top. Is this a problem with all kitchen fans, or could I solve the problem by replacing it?
Best Answer
Partial answer to the new formulation:
how do I make sure the oil goes into the food, not into the fan?
You don't. The oil is not supposed to go into the food that's being fried, it should be fried at the temperature where it does not soak through, else it becomes quite unappetizing. It is normal that you get a lot of oily vapor when frying, especially at higher temperatures, you cannot prevent that. A splatter screen is sometimes used, but it is not suitable for wokking, because you can't move the foodd items with it.
As for what is the right amount of oil, I can't help you exactly because I don't do much wokking on my own. But I suppose good temperature control will indeed use up more fat than modern Western cooks tend to use.
There is a related question of a user complaining about oil splatter, and the conclusion is the same: you have to live with it. Good way to prevent grease build up in kitchen?.
Pictures about "Excess oil in fan grease trap after stir frying in a wok"
How do you get rid of excess oil when frying?
Layer the bottom of your bowl with the bread (while your food is in the oil). When your food is crispy and ready for your belly, just take it out of the oil and place it on top of the bread. The bread absorbs all the excess oil and fats. It works like a dream.How much oil do I need to stir fry?
Put a small amount of oil (1-2 tablespoons) in your wok. You won't typically need much oil - you're stir frying, not deep frying. At this point, you'll also want to add any seasoning and/or spices you're using in your dish.How do I prevent oil in my kitchen?
A cooker/range hood. The proper sort will suck in all that greasy fumes, pass them through a carbon filter (which needs changing) and vents it outside, or upwards(in smaller kitchens without a place to vent it. Its also helpful if you're cooking something that may have irritating fumes.How do you control kitchen grease?
7 Tips To Control Grease In Your Restaurant KitchenMost Dangerous Cooking (Avoid these Completely) 2022
More answers regarding excess oil in fan grease trap after stir frying in a wok
Answer 2
Oil will vaporize. Even before the smoke point. The smoke point is where the oil begins to break down. Water has no smoke point as it does not start to break down before boiling (and it won't burn). Just like water oil will evaporate below the boiling point.
Oils with a higher smoke point as like to have lower vapor pressure. smoke points
Sources: Stack Exchange - This article follows the attribution requirements of Stack Exchange and is licensed under CC BY-SA 3.0.
Images: cottonbro, RODNAE Productions, Ron Lach, Ron Lach