Black flakes from new cast iron pan
I bought a brand new Lodge 12" cast iron pan, washed it in soap and warm water and dried it with a paper towel thoroughly. Then I applied a thin layer of canola oil with a paper towel (paper towel was clean - not black after this application) and then heated the empty pan on my electric stove for 15-20 minutes. The oil on the pan smoked a bit, some parts of the pan turned slightly ashy (grey). Mostly everything looked OK.
After I turned it off and cooled the pan, I now take a clean paper towel and rub the surface and I see black flakes! What is this? Is this the oil broken down? Can I cook in the pan or wash it with soap to eliminate the black flakes? Once washed and dried should I rub canola oil again? This is my first experience with cast iron. Any pointers will help.
Best Answer
It sounds to me like the washing process (and subsequent attempt to re-season) broke down the pre-seasoning and you are losing the oil coating on the pan. When you see the "ashy grey" color, what you are seeing is unseasoned cast iron.
The good news is that it's certainly not unsafe to cook with, even in this state. The black coating is just oil that has been baked onto the surface of the pan, giving it a low/nonstick surface. Totally safe for consumption.
To get your pan back to its best state, you'll need to re-season it. There are a number of good tutorials on the process (such as http://www.thekitchn.com/how-to-season-a-cast-iron-skillet-cleaning-lessons-from-the-kitchn-107614), but it is really quite simple:
1.) Clean your pan well
2.) Apply a coating of fat to your pan - I prefer lard, flaxseed oil, crisco, or vegetable oil (in that order)
3.) Place your pan upside down on the top rack in a 350 degree oven, and bake it for at least 1 hr. I suggest putting a roasting pan or foil on the bottom rack to catch any oil that drips out of the pan during the process
4.) Let cool in the oven, and wipe down gently when done. Your pan is seasoned and ready to use!
After you've seasoned your pan, it's important to make sure you are using the proper cleaning approach to preserve your pan's surface. The ideal way to clean your cast iron is immediately after cooking in it, while it is still hot. Use warm water and a sponge, and then immediately dry it. If you need an abrasive to get stuck-on food off, use some salt and scrub gently.
Never use soap, or highly abrasive cleaning pads (brillo, metal scrubbers, etc). These will strip that non-stick, baked on oil surface and make your pan much less enjoyable to cook with. The good news is that if you ever slip up and notice that the surface has been stripped, you just need to repeat the seasoning process and you should be good to go again.
Hope that helps!
Pictures about "Black flakes from new cast iron pan"
Quick Answer about "Black flakes from new cast iron pan"
First, the black specks you see coming off into your food are not harmful. They are most likely carbon deposits. This happens due to overheating of fats and oils. Using an oil with a low smoke point will carbonize at high temperatures and cause residue from the pores of your pan to rub off onto your food.Cast Iron Seasoning Flaking | How to Fix Seasoning Flaking on Cast Iron
More answers regarding black flakes from new cast iron pan
Answer 2
Most of their pans are "pre seasoned" so the step you took depending on the heat my have actually harmed their process. But wait!, all is not lost!, that's the beauty of cast iron. Go to their site and re season as per their instructions also I like using shortening and not oil on my pans as some oils will tack up (make them sticky) your pans if you don't use them frequently.
Cheers!
EDG
Sources: Stack Exchange - This article follows the attribution requirements of Stack Exchange and is licensed under CC BY-SA 3.0.
Images: Engin Akyurt, Erik Mclean, Алекке Блажин, Engin Akyurt