Why do the inserts in pasta pots not go all the way to the bottom?
I love using a pasta pot/steamer where there is an inner "colander" pot so that you can pull all the pasta out easily.
BUT... in all of the ones I've seen, the inner colander doesn't go all the way to the bottom. There is a gap of about 1.5 to 2", plus the 1/4 space of the bottom of colander itself.
The means I have to boil a LOT more water. That takes more time, uses more water and energy.
It seems like a gap of just 1/2" or so would be sufficient to "insulate" the bottom of the pasta from the hot bottom of the pan. (And I've boiled pasta for years without a colander inside (so zero gap) fine).
Best Answer
You might have given the answer in your question. If the device is to be used as a steamer as well, then there has to be enough room at the bottom of the pot for steaming. How much is enough? There are two things to consider:
The bottom section should hold enough liquid that there won't be concerns about boiling the pot dry for anything you might want to steam. Longer steam items might include mussels, lobster, or tamales.
There should be some 'air margin' for foods like tamales or broccoli, so that the boil splatter doesn't render the food soggy.
Based on FuzzyChef's comment, it sounds like there are tools that suit your needs better. Perhaps it's time to put your steamer on Craigslist? :)
Pictures about "Why do the inserts in pasta pots not go all the way to the bottom?"
Are pasta inserts worth it?
Pasta-wise the insert is handy because it lets you cook more than one kind of pasta, and it also lets you keep the pasta water rather than pouring it out. Pasta water is very useful for thickening sauces as it is full of starch, I stick a ladle in once the pasta is done and use it as necessary.Can you use a steamer insert for pasta?
The steamer insert is removable so you can cook anything you choose. It is perfect for Vegetable, Pasta or whatever you might desire. The basket can be also used as a water strainer as well.Bialetti Trends 5-Quart Pasta Pots at Bed Bath \u0026 Beyond
More answers regarding why do the inserts in pasta pots not go all the way to the bottom?
Answer 2
I've noticed this issue too--that the pasta inserts do not go far enough down into the pot. Makers of a pot sold as a pasta cooking pot should not factor the possibility of steaming into its design. After all, pasta cooking does not require steaming in any way, shape, or form.
But, make no mistake about it, pasta inserts are very useful! They, most importantly, allow for the use of the slated water in which the pasta was cooked to be incorporated into sauce production. So, dumping the water down the drain through a strainer is a serious waste of the water's flavor and texture enhancing properties that could be lent to a sauce.
In any case, makers of these pots ought to dispense with imposing a multi-cooking dimension to pasta cooking pots, and instead make pasta cookware only. Most of us who search for these pots do not want a steamer built into it, especially since a good number of us already have steamers.
Answer 3
Try putting the insert in after cooking the pasta, and then pour out the water while holding the insert in place. The insert holds the pasta at the bottom of the pot. I haven't tested this with every size or amount of pasta.. but it works so well I have to assume this is the correct method... and boiling more water than needed because of a short insert would be very aggravating!
Sources: Stack Exchange - This article follows the attribution requirements of Stack Exchange and is licensed under CC BY-SA 3.0.
Images: Plato Terentev, Julia Volk, Thirdman, Thirdman