A lot of smoke when using induction stove with any recipe with oil
I recently switched from gas stove to induction. I tried some recipes I could do well with the old stove. Most of them have oil at high heat. However, when switching to induction stove, any time I tried with oil, there always be a lot of smoke coming from the meat. The bottom is usually burnt while the top is not cooked yet.
I usually set the temperature to 150-200oC and put oil in immediately. Any advice what I should do? Currently I can only cook soup recipes with the induction stove.
EDIT: Sorry I forgot about the oil. I usually use olive oil, but once I tried vegetable and sesame oil too. Still a lot of smoke.
Best Answer
What kind of oil you're using would be helpful but, really, the answer is, whatever temperature it is you set it at, it's too hot.
Turn the temperature down.
The temperature gauges shouldn't necessarily be trusted to give you a perfect temperature reading. You can use an infrared thermometer to test it but your result tells everything, really.
If your gas stove was underpowered "high" heat may not have really been that high and the induction stove is probably stronger, so you're overheating your pan.
Since you added your oil usage:
Olive oil is a very low smoke point oil (325-375°F/165-190°C), so it should never be heated so much. Some sesame oils are also pretty low (350-410°F/175-210°C), depending.
Vegetable oil (400-450°F/205-230°C) is much better. Soybean or peanut are even higher (450°F/230°C).
Pictures about "A lot of smoke when using induction stove with any recipe with oil"
Induction stove | stove | induction cook top | how to use gas stove utensil on induction
More answers regarding a lot of smoke when using induction stove with any recipe with oil
Answer 2
I usually set the temperature to 150-200oC
Forget the temperature setting of your induction stove. If it has any sensor at all (some don't), it is a sensor below the plate, far away from your pan and food. It has nothing to do with the real tempearature in your pan, and is a useless gimmick.
Use the normal strength setting, and start with the lowest. If the oil still smokes too much on the lowest setting, put the pan higher (e.g. insert a ceramic tile between the pan and plate), or use a different pan (steel will heat less than cast iron, for example) or cook larger amounts of food.
Sources: Stack Exchange - This article follows the attribution requirements of Stack Exchange and is licensed under CC BY-SA 3.0.
Images: RODNAE Productions, RODNAE Productions, RODNAE Productions, RODNAE Productions